Folding Table Napkins: Ship, Fish, Hare

Ship napkin

Looks unusable, slightly asiatic elegance. But it's very easy!

step1 Let the napkin be together in the square. Fold the edge with the four layers diagonal to the top. The result is a triangle.

step2 Fold the right and left edge to the imaginary dotted line. Should look like the following drawings.

step3 Clap the overlaping edge back away.

step4 und nach hinten klappen.

step5 Just seperate the individual layers and the ship is sailing! You'll need this form later for the swan.

Fish

Your guests will you give the glad eye if you fold a napkin so for your next fish dinner! The eye of the fish is a pearl or a colored glass stone. The disadvantage of this napkin form is that it is flat - and takes effect only for small celebrations.

step1 First open the napkin completely. Fold back a 1 inch stripe border.

step2 Fold one half backwards.

step3 Fold the lower part through the break upwards, so that the background part is visible.

step4 Please handle this task with care, moste people stuck in here. Hold the lower border with your finger. Lead the right edge (two layers) to the left edge, but still hold your finger. Now results a triangle, it should look like the image here. Then fold the upper "ear" again to the right.

step5 Same procedure on the other side. Hold the lower part of the napkin, lead the left two layers to the right.

step6 The ear belongs to the left side.

step7 Turn the folded part down to the edge and turn the napkin to backside.

step8 Fold the lower squares diagonal to the middle - these parts are the fins.

step9 Now again the upper part same as the other fold downwards and put it under the layer.

step10 Rotate the napkin back to front - you're done!

Hare

Ok, you've learned in a tough school, and now you're ready for this napkin art work.

step1 First open the napkin completely and fold an edge diagonal to a triangle. Puth your finger to the top, hold it like with the fish napkin form, and fold one layer of the middle of the right side to the middle of the left side. There results a crease-like fold.

step2 Clap this fold back to right. Do the same at the other side: middle left to middle right, and the resulting "ear" back to left.

step3 Now it will be very difficult: take the upper layer of the bottom edge and pull it slightly with feeling to the top, while holding the lower layer on the edge. During this action the borders of the napkin are folding themselves, a narrow rhomb appears. Turn the napkin to backside.

step4 Put the upper layer of the lower square about one inch down of the line left-edge to right-edge inside. Now you'll look at the ears of the hare.

step5 Clap the right layer up and fold itself half inside.

step6 Same procedure on the left side.

step7 Turn the napkin to backside.

step8 Fold through the line forward to you.

step9 Clap the resulting figure along the dashed line backwards and rotate slightly.

step10 Pull the ears of the hare a little bit upwards and press again.

step11 The tail is made like this: Make a crease at the dotted lines, fold at the front line inside, at the back line outside.

Open the ears that the hare can hear you and you've done!